Fireplaces | Gas Fires | Electric Fires | Stoves

		Inset				Outset
		Height	Width	Depth		Height	Width	Depth
	Full Depth	540	375	185		630	540	N/A
	Slimline	540	350	115
	Pureglow Annabelle Cast Iron Gas Fire
	Full Depth	540	375	185		585	470	N/A
	Slimline	540	350	115
	Pureglow Bauhaus Gas Fire
	Full Depth	540	375	185		585	470	N/A
	Slimline	540	350	115
	Pureglow Blenheim Gas Fire
	Full Depth	540	375	185		590	525	N/A
	Slimline	540	350	115
	Pureglow Carmen 3 Sided Cast Iron Gas Fire
	Full Depth	540	375	185		680	525	N/A
	Slimline	540	350	115
	Pureglow Carmen Hole in the Wall Cast Iron Gas Fire
	Full Depth	550	400	230		615	515	N/A
	Slimline	550	380	128
	Pureglow Charlotte Gas Fire
	Full Depth	540	375	185		630	540	N/A
	Slimline	540	350	115
	Pureglow Chloe Cast Iron Gas Fire
	Full Depth	540	375	185		630	545	N/A
	Slimline	N/A	N/A	N/A
	Pureglow Churchill Cast Iron Gas Fire
	Full Depth	540	375	185		585	470	N/A
	Slimline	540	350	115
	Pureglow Daisy Gas Fire
	Full Depth	540	375	185		585	470	N/A
	Slimline	540	350	115
	Pureglow Grace Gas Fire
	Full Depth	540	375	185		630	540	N/A
	Slimline	540	350	115
	Pureglow Juliet Cast Iron Gas Fire
	Full Depth	540	375	185		585	470	N/A
	Slimline	540	350	115
	Pureglow Media Gas Fire
	Full Depth	550	400	230		615	515	N/A
	Slimline	550	380	128
	Pureglow Sienna Gas Fire
	Full Depth	540	375	185		600	530	55
	Slimline	540	350	115
	Pureglow Zara Cast Iron Gas Fire

Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. If you intend to install the Slimline fire into a Class 2 flue then subject to the depth you have, you may require a 3" 75mm deep rebated fire surround. * The spigot outlet of the fire is 560mm high but should still fit into the gather at the top of the fireplace as the appliance is fitted. Any modifications to the fireplace must be to a height if 560mm min. Output depends on flue-pull, diameter of flue and conditions of fireplace. Where there is insufficient depth a deep rebate surround may be required. This gas fire incorporates an oxygen depletion device in its flame supervision which cuts off the gas to the burner if oxygen levels in the room become too low. Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the existing fire has been removed. Note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble fuel effect and or a light coloured fireback. Although we (and our Manufacturers) display some products in photographs with and without a hearth the ultimate decision of whether a hearth is required or not is that of your registered gas installer, as Building regulations and Gas Safe Register regulations may differ in areas throughout the UK. However for the avoidance of doubt Pureglow would recommend that a hearth is installed. With all Pureglow cast iron products you should expect slight imperfections/small marks due to the authentic manufacturing process as all products are hand finished and therefore each and every casting will be slightly different and unique in its own way which is normal and to be expected with cast products of this type. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Pureglow themselves. For more information visit www.pureglowltd.co.uk/.