Fireplaces | Gas Fires | Electric Fires | Stoves

		Height	Width	Depth
Aspect 4 Gas		484	386	406
Aspect 7 Gas		550	579	410
Consort 5 Gas		551	396	390
Consort 7 Gas		595	625	415

NOTE: Note: The delivery service offered on this product is based on a one man, kerbside, only delivery as the couriers are not insured to carry goods into your property. Due to the nature and weight of this product the goods will arrive palletised so you will need to arrange additional assistance to offload the goods from the vehicle/pallet when they arrive at your nominated delivery address. This product is also delivered on a pallet normally by a vehicle in excess of 7.5 tonnes or more so please ensure to have adequate access and to advise us in writing by email if your property has any difficulties with access as soon as you have placed your order so we can look to make alternative arrangements to avoid you incurring additional costs in the event a delivery cannot be made if the vehicle cannot deliver safely to your location. You will also need to fully unwrap and visually inspect the goods on delivery for any signs of transit damage before signing for the goods in good condition in accordance with our terms & conditions on our website.​ Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this stove before making any purchase to avoid disappointment. This stove does not require any electrical supply, but does require a natural gas supply. Also be aware that due to the stove producing heat the interior / exterior of the stove may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time. Please note that soot deposits on a gas stove are quite normal and to be expected, it may be more visible on a log fuel effect. Ensure that the room in which the Stove product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean gallery cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion, to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from your Gas Safe Register engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint may eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.