Crystal Fires Manhattan Hole in the Wall Gas Fire
High Efficiency Glass Fronted Modern fire with up to 4.3kW heat output 79% Efficient The stylish fascia is made up in two parts. Both the inner trim that surrounds the glass and the outer frame that sits against the wall can be supplied in a wide selection of powder coated finishes. You may opt for both of these parts to be the same colour or a combination of contrasting finishes Choice of 4 different colour trims either Chrome, Brushed Steel, Black or Graphite Shown opposite with the Black Outer and Black Inner Trim Choice of Log (shown opposite), Pebble or Driftwood fuel bed effect Real dancing flame effect Black interior to fire Fully sequential remote control as standard Glass Fronted inset Gas Fire Suitable for Class 1 chimney's & class 2 prefabricated flues Natural Gas only Click here to view the Crystal Fires Brochure Click here to view the Crystal Manhattan Installation Instructions Free Delivery! Estimated delivery 5 working days		Product Reference: FPMS4332 Need a brochure? then click here usual price £1,499.00 Our Price £1,199.00 Best price on the net Seen the Crystal Fires Manhattan Hole in the Wall Gas Fire cheaper? Then click here

Select your Finish

Black Outer Trim	Brushed Steel Outer Trim	Chrome Outer Trim
Graphite Outer Trim

Select your Trim

Black Inner Trim	Brushed Steel Inner Trim	Chrome Inner Trim
Graphite Inner Trim

Select your Hearth and/or Back

Crystal Black Ribbed Fire Interior

Select your Fuel Effect

Crystal Driftwood	Crystal Logs	Crystal Pebble

Select your Energy Type

Crystal Fires Natural Gas (NG)

Select your Control

Crystal Fires Fully Sequential Remote Control

usual price £1,499.00 Our Price £1,199.00 Best price on the net

Specification

External Dimensions H 765mm W 1020mm D 80mm Inset Dimensions H 660/680mm W 770/800mm D 285mm OutPut Maximum heat input 5.5Kw Maximum heat output 4.2Kw

Details Glass Fronted High Efficiency Gas Fire Flue Suitable for class 1 chimneys & class 2, 125mm (5" diameter) flues Ventilation An air vent is not normally required

Notes

NOTE: The delivery service offered on this product is based on a one man only curbside delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises. We strongly recommend that you have a survey carried out by a Gas Safe registered gas installer to check and certify the compatibility of your chimney or flue with this fire and that you read the installation instructions provided, prior to purchase, to avoid disappointment. This gas fire incorporates an oxygen depletion device in its flame supervision which cuts off the gas to the burner if oxygen levels in the room become too low. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble or a light coloured fuel effect such as logs.

Please note the 2 sets of dimensions (shown above) under the heading "Inset Dimensions" are the minimum or maximum height and width of opening size, required in the wall, when installing this product.For more information please see www.crystalfires.co.uk