NOTE: All measurements are in millimetres. Carron say to allow between an 8mm - 10mm, per metre tolerance allowance on all of their cast fireplaces during the manufacturing process so you should expect imperfections in accordance within these parameters due to the unique casting of such authentic reproduction fireplaces. All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability. The delivery service offered on Carron products is based on a one man, kerbside, only delivery as the couriers are not insured to carry goods in to your property. Due to the nature and weight of this product the goods will arrive palletised so you will need to arrange additional assistance to offload the goods from the vehicle/pallet when they arrive at your nominated delivery address. All Carron products are delivered on a pallet normally by a vehicle in excess of 7.5 tonnes or more so please ensure to have adequate access and to advise us in writing by email if your property has any difficulties with access as soon as you have placed your order so we can look to make alternative arrangements to avoid you incurring additional costs in the event a delivery cannot be made if the vehicle cannot deliver safely to your location. You will also need to fully unwrap and visually inspect the goods on delivery for any signs of transit damage before signing for the goods in good condition in accordance with our terms & conditions on our website.
NOTE
Carron products are delivered on a pallet by a commercial courier who have very strict rules on reporting any damage which MUST be done ON DELIVERY/AT TIME OF THE DELIVERY of you receiving the goods in order to register a valid claim as thereafter they will not accept any liability and any replacements would be chargeable to you. Their courier will wait with you for a maximum of 20 minutes whilst you open the packaging and check the goods over for any signs of visual damage before you actually sign for the goods to confirm they have been received in good condition. If any damage is found with the goods then this MUST be noted on the drivers paperwork or electronic device, whichever is applicable and the goods should be rejected, if you can, also take some digital pictures with a smartphone or tablet device and email them to us. If this is not noted on their paperwork or electronic device at the time of delivery and you accept the goods then it will be deemed that you have received the goods in good condition and once the driver leaves neither Carron, their courier or ourselves will accept any claims for damage so any replacements would only then be supplied on a chargeable basis.
In some instances additional delivery charges may apply based on your location as explained in our Terms & conditions. On receipt of your order we will advise you by email if this applies to your order/location. Alternatively, if you prefer, you can contact us prior to placing your order, by emailing our sales team who will confirm by return email whether any charges apply to your location and how to make payment. Note - All Scottish postcodes will incur additional delivery charges as standard, based on the geographical location in Scotland, additional charges will be notified to you on receipt of your order by email or prior to ordering by contacting our sales team by email for a price.
The Hearth thickness is 50mm. Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue and or circumstances with this fire, prior to making any purchase, to avoid disappointment. This fireplace requires a class 1 chimney, class 2 prefabricated flue or Electric for homes with no chimneys, depending on the model you select. The above fires do not normally require additional ventilation in the room. Please note that all the above sizes are in millimetres (mm). Output depends on flue-pull, diameter of flue and conditions of fireplace. Ensure that the room in which the cast iron product is being installed is thoroughly dry e.g recently plastered walls cause high levels of moisture in the atmosphere and, as a result, rust is almost inevitable. Under no circumstances should a Water-based cleaner or polish be used to clean cast iron products. Moisture is prone to dropping from the chimney, and is likely to cause corrosion. to minimise this it is recommended that you have your chimney swept clean and to seek advice regarding from a Gas Safe Registered or Hetas engineer regarding the installation of a chimney cowl. When using a gas fire, the products of combustion sometimes cause white deposits to form. These deposits can usually be removed with a soft brush. High temperature paint is used on all black finish items. This paint will eventually burn off. This can be maintained with our High Temperature Black paint available when purchasing the item.
All information contained in the website is to assist in your choice of a suitable fire and is not intended to rely on in full to organise your purchase. Before ordering please clarify with a suitably qualified installer to confirm suitability.
If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineer.
This is not intended to be all the information required to install your fire. This can be obtained from Carron themselves For more detailed information about this product visit www.Carron.uk.net.
