Flavel Calibre Balanced Flue Gas Fire
Maximum heat output (NG) 3.9kW/93.5% efficient - (LPG) 4kW/ 93.5% efficient (In accordance with the new EU directive for energy ratings effective from January 2018) Click link to view the (NG) energy label Flavel Calibre NG Manual or Remote Control Coal fuel effect only Glass fronted balanced flue inset fire Silver or Brass finish Designed for homes without a chimney or flue Natural gas only Depth of 185mm fully inset An optional extra flue extension of 830mm long is available to increase the flue length when fitted to the rear of the fire to 1010mm on manual control models and 973mm on Push Button Control models (see optional extras section below to select this if required) Click here to view the Flavel Gas Fire Brochure Click here to view the Flavel Calibre Installation Instructions Click here to view the Flavel Calibre Technical Drawings Free Delivery! Estimated delivery 3 working days		Product Reference: FPMS2594 Need a brochure? then click here usual price £1,399.00 Our Price £974.00 Best price on the net Seen the Flavel Calibre Balanced Flue Gas Fire cheaper? Then click here

Select your Trim

Flavel Calibre Brass Finish

Flavel Calibre Silver Finish

Select your Fuel Effect

Select your Energy Type

Natural Gas (NG)

Select your Control

Manual Control Manual Rotary Control

Flavel Calibre Remote Control + £185.00

Select your Optional Extras

Flavel Calibre BF 830mm Extended Flue Terminal + £199.00

usual price £1,399.00 Our Price £974.00 Best price on the net

Specification

External Dimensions H 595mm W 500mm D N/Amm Inset Dimensions H 551mm W 406mm D 185mm OutPut Maximum heat output high 3.9Kw

Details Contemporary Balanced Flue Gas Fire Flue No chimney or flue required as this fire is a balanced flue gas fire which vents horizontally directly through an external wall. Ventilation An air vent is not normally required

Notes

NOTE: We always recommend that you should have a survey carried out by a Gas Safe registered gas installer, HETAS installer or qualified NICEIC electrician (whichever is applicable to the goods you intend to purchase) to check and certify the compatibility of your chimney, flue, property and or circumstances prior to purchase to avoid disappointment. We also recommend that you should wait until you have the goods purchased, onsite, in your possession to take accurate measurements from before proceeding to carry out any building work or create any apertures in the wall to avoid potential costly mistakes being made, as manufacturers reserve the right to alter products or specifications without any prior notice as required.